ZXBX-701TD Automatic adhesive tape cutter
-This machine is for cutting adhesive tape. Especially, it has a good
performance in cutting tapes which request high-precision cutting, such
as electricity industries and automobile industry tapes.
-Such as, TAC-TAPE, Kapton tape, aluminum tape, double-side tape,
masking tape, fabric tape, polyester tape, PE film, PVC insulated tape,
PET tape, foam tape, 3M series, and so on.
1.Adopt PLC for controlling by automatic program.
2.Adopt servo motor system for feeding blade. It characterize in stable, high precision, and minimum maintenance.
3. The motors are drive by frequency converter which is vector output
style. It characterizes in stable power output both in slow speed and
4. Adopt a touch panel for inputting data. The user can operate the machine and monitor the machine status from it.
5. The user can set 10 groups of cutting size in one working cycle. Then the machine will cut automatically.
6.The user can operate the machine from two different places: the
touch panel and the operation panel. It is very convenient for the user.
6. Adopt servo motor for fixing cutting position; precise ball screw
drive. The cutter moves forward left or right on the linear motion guide
which is very precise. All these parts are very important on this
machine. We adopt the best quality so as to make the cutting precise and
7. The motors are stepless speed regulation; and theirs rotation
direction is reversal. These functions are good for cutting different
8. Blade cooling system is adopted to the cutter. When cutting, it cools
down and lubricates the knife automatically. The tape will never be
9.The cutter angle can turn left or right automatically. This function
is very useful when cutting tapes with different diameter; this is
because different diameter requests different angle. It can also improve
the cutting precision and make the operating simpler.
10.Adopt a sharping system to sharp the blade so as to make sure the cutting is alway complete.
11. Adopt safe solutions to protect both the user and the machine. We
set safe program in the PLC; in some dangerous cases, the machine will
stop automatically. If the condition does not allow, the machine can not
so as to avoid danger. And, the machine can make alarm automatically
when to show the wrong operating and the potential dangers. A security
closed cover is adopted. It is more safety for the user than other
machines. Besides, this machine is best for use in the Clean-Room
Max.effective width: 1350/1600mm (optional)
Fits paper core: ø3 inch
Max. cutting diameter: Ø400mm
Min. cutting width: 0.5mm
Cutting Tolerancce: ±0.03mm --±0.12mm
Max. Blade/knife Diameter: ø450mm
Knife feeding way: Servo Motor System
Voltage: 380V 50HZ (other voltage is optional)
Power: 10 KW