1.Adopt PLC for controlling by automatic program.
2.Adopt servo motor system for feeding blade. It
characterize in stable, high precision, and minimum maintenance.
3. The motors are drive by frequency converter
which is vector output style. It characterizes in stable power output both in
slow speed and high speed.
4. Adopt a touch panel for inputting data. The
user can operate the machine and monitor the machine status from it.
5. The user can set 10 groups of cutting size in
one working cycle. Then the machine will cut automatically.
6.The user can operate the machine from two
different places: the touch panel and the operation panel. It is very
convenient for the user.
6. Adopt servo motor for fixing cutting
position; precise ball screw drive. The cutter moves forward left or right on
the linear motion guide which is very precise. All these parts are very
important on this machine. We adopt the best quality so as to make the cutting
precise and stable.
7. The motors are stepless speed regulation; and
theirs rotation direction is reversal. These functions are good for cutting
8. Blade cooling system is adopted to the
cutter. When cutting, it cools down and lubricates the knife automatically. The
tape will never be melted.
9.The cutter angle can turn left or right
automatically. This function is very useful when cutting tapes with different
diameter; this is because different diameter requests different angle. It can
also improve the cutting precision and make the operating simpler.
10.Adopt a sharping system to sharp the blade so
as to make sure the cutting is alway complete.
11. Adopt safe solutions to protect both the
user and the machine. We set safe program in the PLC; in some dangerous cases,
the machine will stop automatically. If the condition does not allow, the
machine can not start
so as to avoid danger. And, the machine can make
alarm automatically when to show the wrong operating and the potential dangers.
A security closed cover is adopted. It is more safety for the user than other
machines. Besides, this machine is best for use in the Clean-Room environment.